Ordyn’s STM-1 CPE is a feature-rich, next-generation SDH STM-1 Add-Drop Multiplexer with Ethernet over SDH support in a compact or wall rack mountable 19” by 2U form factor chassis. A typical configuration may comprise providing 21/63 E1s with one 1E3/DS3, Ethernet 10/100 BaseT ports or GbE port. The TDM switch supports cross connects at VC-12/3/4 levels.All features of a full-fledged ADM such as virtual concatenation, fully non-blocking, any port to any port cross-connect at up to VC-12 level including tributary to tributary and broadcast connections, hold-over clocks, SNCP-N based ring protection and Engineering Order-Wire are supported.
-
Features:
- Optical line interface using SFP modules at 155.52 Mbps
- Electrical line interface at 155.52 Mbps as per ITU-T G.703
- 4 or 8 Ethernet ports supporting 10/100BaseT and 100BaseFX Ethernet
- E1 interface as per ITU-T G.703 (120 ohm) up to 63 ports
- Supports 1310nm and 1550nm on a single mode fiber
- No forced cooling
- Tributaries and interfaces including power supply offer front access for easy provisioning
Ordyn 1230 - STM -1/4 Multi ADM
The Ordyn 1230 Multi-Service ADM/TM/Regenerator- STM-1 /4 is a carrier class product used for telecommunication transmission networks based on the standards and recommendations on SDH from the ITU-T and ETSI.
The Ordyn-1230 is a second generation SDH product using state-of-the-art technology to integrate Add/Drop Multiplexer (ADM), Terminal Multiplexer (TM) and Regenerator (REG) on a single module giving VC-4, VC-3 and VC-12 cross-connect. This product can terminate two STM-1 rings and can work as a digital cross-connect with a capacity of 6 x STM-1 (12 x VC4 option for STM-4 support) equivalent cross-connects.
-
Features:
- Upgradeable modular system
- Optical line interface using SFP modules at 622.08 Mbps or 155.52 Mbps
- Electrical line interface at 155.52 Mbps as per ITU-T G.703
- Supports GFP mapped 10/100BaseT, 100BaseFX Ethernet using virtual concatenation and LCAS, L2 Switching with Q in Q
- E1 interface as per ITU-T G.703 (120R)
- E3 (34 Mbps) and DS3 (45 Mbps) interface are software configurable
- Fully non-blocking cross connect of ports with a granularity of VC12
- Long and short haul capacity
Ordyn 1209 - STM -1 (2U) modular
The Ordyn 1209 is a next-generation SDH STM-1 Add-Drop Multiplexer with Ethernet over SDH support in a compact or wall rack mountable 19" by 2U form factor chassis. The Ordyn 1209 offers all configurations required in the network, namely Add/ Drop Multiplexer(ADM), Terminal Multiplexer(TM), Regenerator(REG). The ADM and TM have an integrated fully nonblocking cross-connect at a 5XSTM-1 equivalent with broadcast capability to connect any channel to any channel at VC-4, VC-3 and VC-12 granularity.
The Ordyn-1209 permits the cross-connect of service tributary ports in order to provision local leased lines without utilizing any bandwidth on the fiber. Furthermore, this product can cater to a maximum ADM configuration for 63E1s. Minimum configurations can support 21E1. All features such as Virtual Concatenation, hold-over clocks, SNCP-N based ring protection and Engineering Order-Wire are supported.
-
Features:
- Optical line interface using SFP modules at 155.52 Mbits/s as per ITU-T G.957
- Electrical line interfaces at 155.52 Mbit/s as per ITU-T G.703 (Optional)
- Supports 10/100 BaseT & 100 BaseFX ethernet
- E1 interface as per ITU-T G.703 (75R/120R)
- E3 (34 Mbps) and DS3 (45 Mbps) interfaces
- Fixed configuration of ADM is with 21E1s and additional tributaries are in modular design
- Tributaries and interfaces including power supply offer front access for easy provisioning and wall mounting
- Multiplexing/ Demultiplexing comply to ITU-T G.707
- Port upgrades with a granularity up to VC12
- Q3 based NMS agent with 7-layer OSI and ROSE/CMISE as per G.784
- No forced cooling required
- Suitable for FTTB (Fiber To The Building) applications